Low temperature and high humidity thawing machine, solution to poor thawing effect

　　You may encounter situations where the low-temperature and high humidity thawing machine has a very good thawing effect on frozen meat, whether it is pork, beef, lamb, or seafood. The thawing speed is very fast, but over time or due to improper operation, the thawing effect may be poor. If we encounter the above problems, how should we solve them, or how should we investigate them ourselves? I have compiled some basic troubleshooting methods for everyone.

　　Firstly, check the operating status of each device, such as refrigeration compressors, humidifiers, steam engines, water pumps, circulating fans, etc.

　　1. Check whether the refrigeration compressor starts and operates normally, whether the refrigerant leaks, whether the refrigeration oil is missing or not clean, and whether the pressure and temperature are normal. If any of these issues are found, repair or replace them.

　　2. Check if the humidifier is working properly, if there is any abnormal humidification, and if there is no water in the humidifier.

　　3. Check if the steam engine is functioning properly, and if the pipelines and valves are functioning properly.

　　4. Check whether the pumping function of the water pump is normal, whether the pumping force is sufficient, and replace its accessories if there are any problems.

　　5. Check if the motor of the circulating fan is damaged or stuck. If the motor is damaged or stuck, replace it directly and repair it.

　　The problem is caused by the door leaking air

　　1. The reason for the unstable closing of the defrosting machine door, identify the source of the air leakage, and repair it

　　Equipment not starting due to power failure

　　1. Check if there is any phase loss or phase interruption in the main power supply, and if so, repair the circuit.

　　2. Check if there are any issues with the corresponding contactors of each device (repair if there are any problems)

　　3. Check for poor contact in each circuit (if any, replace or repair)

　　The above are some basic inspection methods prepared by Dachang editor for you. The above methods are for reference only and the interpretation rights belong to Dachang. If you have any questions, please contact us!

Related Recommendations