Dried jelly dryer shipped to CEO of a food company in Zhejiang

　　Specific information about the case of engineers from Ganzhou Dachang Air Conditioning Equipment Engineering Co., Ltd. visiting a food company in Zhejiang to install a jelly dryer. The following are the installation steps for the device:

　　1. Equipment acceptance: After the freeze-drying machine arrives at the destination, the appearance of the equipment should be inspected first to confirm that the packaging is intact and undamaged before starting to unpack.

　　2. Installation location selection: The freeze dryer needs to be installed indoors in a stable and well ventilated place, avoiding direct sunlight.

　　3. Connect power supply and drainage pipeline: Connect the power cord and drainage pipeline according to the equipment manual requirements.

　　4. Assembly equipment: Assemble various parts of the equipment in order, including the main unit, vacuum pump, cold trap, circulating water system, etc.

　　5. Exhaust test run: Before formal use, conduct an exhaust test run to ensure that the equipment is working properly.

　　6. Trial production: After confirming the stable operation of the equipment, trial production can be carried out by gradually adjusting the process parameters to achieve the desired freeze-drying effect.

　　We will briefly introduce the shipment of the jelly dryer to the CEO of a food company in Zhejiang. Overall, although I have not found specific case information, you can refer to the general installation steps above to guide your operation. If you have any further questions, feel free to ask me.

Related Recommendations